Ball Lock Disconnect - CMB Gas with barb
Gas disconnect for 19L Post mix keg.
German-made Ball-Lock Gas Connector
Gas Connector with 1/4in Barb Ball-lock gas connector for 3g to10g post- and pre-mix product tanks with ball-lock tank plugs.
Dimensions Height: 2.1in (54mm)
Barb Diameter: 0.25in (6mm) Barb
Angle: 30°
Materials Body: Plastic Barb Post: Stainless Steel Tubing Required: 5/16in or 1/4in I.D. tubing (clamp recommended). See the helpful hint below for more tubing information.
Helpful Hint To Home Brewers: Many beer draft systems contain gas tubing that is 5/16in to 3/8in I.D. which is larger than the 1/4in barbed end of the connector). Teflon tape or a small piece of 1/4in tubing can be placed on the barbed end to increase the diameter.
Keg Compatibility: Ball-Lock connectors fit nearly any post- or pre-mix product tank commonly used for soda with ball-lock connection posts. There are many manufacturers, sources and sizes of product tanks. Such product tanks are referred to as Cornelius or ‘Corney’ kegs after the popular industry brand.